Viking Runic Compass Decal Sticker for Vikings

The sticker comprises three distinct layers. First, ensure the surface is clean and dry. Next, peel off the backing film, but only partially, about 2 cm. This will allow you to position the sticker precisely where you want it. Gently stick the head of the transfer tape onto the surface, which will determine the position of the sticker.

Slowly pull the backing film, applying the sticker little by little as you go. Rub the sticker firmly and repeatedly to ensure it adheres completely and securely. Finally, carefully lift the transfer tape, removing it bit by bit. You can apply light pressure as you do this to prevent the sticker, especially the smaller sections, from being lifted along with the tape.

For a smaller sticker, the process is similar. Begin by cleaning and drying the surface. Peel off the backing film entirely. Apply the sticker, rubbing it thoroughly to bond it to the surface. Gradually lift the transfer tape, pressing down as you go to prevent the sticker from being removed with the tape, particularly the delicate areas.

Regardless of the sticker size, the key steps are: (1) prepare the surface, (2) partially or fully remove the backing film, (3) position and apply the sticker, rubbing it firmly, and (4) slowly lift the transfer tape, using light pressure to keep the sticker in place. By following these instructions carefully, you can ensure the sticker is applied smoothly and securely, every time.

product information: